November 24, 2017

ECO-SWR: The Dis-connectable Secondary Water Retarder from Voith

With the Secondary Water Retarder (SWR), Voith has been offering bus and truck operators hydrodynamic continuous braking that works in conjunction with the coolant of the engine. In the next generation of the SWR, the unit can be disconnected whilst idling. This means that, in addition to contributing to maximum safety, low operating costs and environmental protection, the ECO-SWR will in future also help to further reduce fuel consumption and vehicle emissions. Voith displays this innovation at IAA Commercial Vehicles 2016 in Hanover for the first time. The debut comes at just the right time. According to the plans issued by the European Commission, CO2 emission limits for trucks and buses will be introduced also in Europe in the medium term.

The USA, Canada and China already have CO2 emission limits for heavy duty vehicles, and it is only a matter of time before the European Commission also introduces similar regulations. In this context, it is important to utilize any and all opportunities to further optimize the CO2 efficiency of heavy duty vehicles. In this regard, the SWR is a groundbreaking solution within the Voith portfolio already today. However, it will become even more environmentally friendly soon.

At the IAA 2016 in Hanover, Germany, Voith will be presenting the new generation of the Secondary Water Retarder. The ECO-SWR can be disconnected from the drive train during idling mode and thus contributes to further reducing the fuel consumption and emissions of trucks and buses. This benefits the vehicle manufacturers with regard to the overall vehicle efficiency as well as the operator, who saves on fuel costs and taxes.

No Power Consumption When the Retarder is Disconnected
Since the rotor of the retarder is force-fit to the drive train, it rotates permanently whilst driving. This consumes energy – even if no braking power is required. In the ECO-SWR, a coupling disconnects the rotor from the drive shaft in idling mode. This means that no further energy is consumed.

Today, the SWR contributes to fuel savings by facilitating proactive driving behavior and fewer gear changes. The automated disconnection functionality in the ECO-SWR will further reduce fuel consumption, thus leading to savings in the range of three-digit euro figures per year. At the same time, the technology contributes to a reduction in CO2 emissions, which not only protects the environment but can also have a positive effect on the CO2 certification of vehicles.

The driver still benefits from great driving comfort and safety offered by the ECO-SWR. The continuous brake system is actuated as usual either via the steering column or the brake pedal. Like its predecessor, the ECO-SWR is integrated into the vehicle’s brake management system. Emptying and disconnecting thus takes place automatically after each braking process.

Braking with Water: Reduced Weight and Service Requirements
The ECO-SWR is a secondary retarder that brakes with water, using the coolant of the engine. This means it does not require an additional operating medium and manages 90 percent of all vehicle braking operations wear-free. At the same time, its pumping effect increases the coolant flow-rate. This in turn increases the continuous brake output by 20 to 30 percent, which means that the maximum braking torque remains available even during long descents.

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Time limit is exhausted. Please reload the CAPTCHA.